In our last post, we go over the basics of weatherstripping: what is it, and why does it matter? In this post, you’ll find three (relatively) easy steps to inspect your own weatherstripping. As always, we recommend calling a professional to do this for you. At Alamance Insulation and Gutters, we are here to help you with all your insulation needs – including weatherstripping. Give us a call for a free consultation!
1. Check the Weatherstripping Around Your Doors
You should check your weatherstripping at least yearly to ensure it’s all intact and is not letting chilly air inside. To start, you’ll need to visually inspect your weatherstripping. What you’ll look for can depend on what type of weatherstripping you have on your door. It’s usually one of the following:
- Foam tape: This is the most common type of weatherstripping. It provides a good seal but can be damaged easily.
- Door sweeps: These are pieces of rigid material like stainless steel, hard plastic, or aluminum fitted to the underside of a door. Attached to the rigid material is a piece of plastic, nylon, vinyl, or a brush to help prevent outdoor air from entering between the door and the threshold.
- Tension seals: This type of weatherstripping involves pieces of plastic or metal folded into a V shape and attached to the underside of a door. They spring open to seal gaps in door jambs and window casings.
- Tubular vinyl, silicone, or rubber: Tubes of vinyl or rubber that adhere to a rigid material like wood or plastic are attached to a door in this type of weatherstripping. Tubular silicone weatherstripping is generally fitted into a milled groove on the door.
You open your doors and windows often, and the friction can damage weatherstripping after a while. Foam tape is the most fragile, while tension seals and door sweeps can stand up to plenty of use. When visually inspecting your weatherstripping, look for the following signs of wear and tear:
- Gaps
- Rips
- Tears
- Dents
- Bent or missing bristles on door sweeps
If you notice any of these issues, take note of its location, size, and quantity before moving on to the next step.
2. Check the Weatherstripping Around Your Windows
Windows can have the same types of weatherstripping as doors, so visually inspect for the same types of damage. To ensure you have a good seal, try the following tests.
- Hold a flame near the gap between the door or and the casing. The flame should not waver. If it does, your weatherstripping is allowing a draft to enter the home.
- Attempt to slide a flat piece of paper between the door or window and the casing. If the paper slides through easily, your weatherstripping is allowing a draft to enter the home.
Again, take note of where you found any imperfections and how many you found.
3. Purchase Any New Weatherstripping and Repair Your Current System
Once you have a list of any weatherstripping you need to replace, it’s time to head off to the store—well, almost. Before making your purchase, consider the following factors to ensure you get the right type of replacement weatherstripping.
- Area Will this product go in a high-traffic area where doors or windows are frequently opened? Friction and use can cause wear and tear to less durable materials. You may want to invest in a sturdier material for, say, your front door than you might for the back door that will stay closed nearly all winter.
- Style of Home Rubber or foam products may look out of place in an older home. Metal weatherstripping can enhance the look of older construction.
- Budget Foam tape is inexpensive but will likely need to be replaced every few years. Metal tension seals and tubular rubber last longer but are more expensive.
- Ease of Installation Foam tape is easy to install and only requires scissors to cut it to length. Other products may require tools like power drills for installation and take a little more experience to install correctly.
To replace weatherstripping, follow the manufacturer’s instructions on the packaging.
- Foam tape uses adhesive backing to adhere to surfaces. Ensure the surface is clean and free of debris and remnants of old weatherstripping before applying.
- You’ll apply door sweeps and tension seals using hardware that the manufacturer will usually supply. Using a power drill or power screwdriver, affix the weatherstripping to the door or window. Open and close the door or window to ensure it closes well.
- Tubular vinyl and rubber weatherstripping are attached using staples or small tacks or brads attached to the flange or backing on the product.